Certifications
All Flame Retardants are certified by independent lab testing. Our products exceeded the requirements of NFPA 701 with minimal loss of mass, zero after flame and zero flaming dripping. For the California Title 19 testing, char length was less than half the required to pass and also had zero after flame.
For the CAN/ULC S-109 tests, damage length was well below required and exhibited zero after flame and zero flaming dripping. For CAN/ULC S-109 Large Scale, the char damaged length was a third of limit, with zero after flame time and zero flaming dripping.
- NFPA 701
- California Administrative Code Title 19
- CAN/ULC S109 Small Scale
- CAN/ULC S109 Large Scale
- Safety Data Sheet
- Approved Flame Retardant Chemical License From California Fire Department
- General Applicator License from California Fire Department
Warranty
Our products are certified by tests conducted by an independent third party laboratory. Provided the products are applied following manufactures procedures, we guarantee they will provide flame retardant functions as represented by the above test standards. As we cannot control the application and environmental conditions, there are no other warranties expressed or implied. The applicator is responsible for determining the safety of their particular application. Depending on the requirements of the Fire Code in a particular jurisdiction, third party testing of the final applied product may be required.